Resistência ao impacto de dois acrílicos convencionais e dois acrílicos de alto impacto para próteses totais
DOI:
https://doi.org/10.21615/cesodon.34.1.5Palavras-chave:
Bases de próteses, resina acrílica, prótese total, teste de materiais, acrílicoResumo
Introdução y objetivo: as resinas acrílicas são os materiais ideais para a elaboração de próteses totais, porém as quedas ou golpes os tornam suscetíveis a fraturas. Conhecer as propriedades e limitações dos acrílicos em nosso ambiente, permite realizar tratamentos com os melhores materiais.. O objetivo deste estudo foi comparar a resistência ao impacto de d ois acrílicos convencionais e dois de alto impacto para bases protéticas. Materiais e métodos: foram feitas 40 barras de cera para que a base seja silenciada de acordo com as especificações de quatro marcas de acrílicos (n=10), Lucitone199®, resina acrílica Masterdent, Veracril high impact® e convencional. A resistência ao impacto foi avaliada pelo teste de Charpy (Máquina ITC-XJU-22), com uma massa pendular de 0.237 kg e uma força de impacto de 1J. Foi realizada análise estatística ANOVA unidirecional e teste de tukey. Resultados: os valores de resistência ao impacto foram de 16.5, 10.8, 9.3 e 5.9 KJ/m2 para a resina acrílica Lucitone199 ®, Veracril high impact®, Veracril convencional® e Masterdent. Conclusões: com as limitações desta investigação, os acrílicos de alto impacto podem ser considerados uma alternativa mais viável para a elaboração de próteses totais em comparação aos acrílicos convencionais, a fim de reduzir o risco de fraturas devido a acidentes ou cargas de impacto repentinas.
Downloads
Referências
Ministerio de Salud de Colombia. IV Estudio Nacional de Salud Bucal - Capitulo 3. 2013.
Alhareb AO, Akil HM, Ahmad ZA. Impact strength, fracture toughness and hardness improvement of PMMA denture base through addition of nitrile rubber/ceramic fillers. The Saudi Journal for Dental Research. 2017;8(1):26-34.
Ajaj-ALKordy NM, Alsaadi MH. Elastic modulus and flexural strength comparisons of high-impact and traditional denture base acrylic resins. Saudi Dent J. 2014;26(1):15-18.
Thompson H, Bourbonniere M. Traumatic injury in the older adultfrom head to toe. Crit Care Nurs Clin N Am. 2006;18:419-431.
Mansour MM, Wagner WC, Chu T-MG. Effect of mica reinforcement on the flexural strength and microhardness of polymethyl methacrylate denture resin. J Prosthodont. 2013;22(3):179-183.
Kanie T, Fujii K, Arikawa H, Inoue K. Flexural properties and impact strength of denture base polymer reinforced with woven glass fibers. Dent Mater. 2000;16(2):150-158.
Qasim SB, Kheraif AAA, Ramakrishaniah R. An Investigation into the Impact and Flexural Strength of Light Cure Denture Resin Reinforced with Carbon Nanotubes. 2012;5.
Hari Prasad A. Effect of glass fiber and silane treated glass fiber reinforcement on impact strength of maxillary complete denture. annals and essences of dentistry. 2011;3(4):7-12.
Zappini G, Kammann A, Wachter W. Comparison of fracture tests of denture base materials. The Journal of Prosthetic Dentistry. 2003;90(6):578-585.
Jagger DC, Jagger RG, Allen SM, Harrison A. An investigation into the transverse and impact strength of «high strength» denture base acrylic resins. J Oral Rehabil. 2002;29(3):263-267.
Ortega Y. Prueba de impacto: ensayo Charpy. Rev Mex Fís E. 2006;52(1):51-57.
International Organization for Standarization. Norma ISO 1567:1999. 1999.
Meng TR, Latta MA. Physical properties of four acrylic denture base resins. J Contemp Dent Pract. 2005;6(4):93-100.
Dikbas O, Unalan G& F. Comparative study of impact strength of six acrylic denture resins. Materials Research Innovations. 2010;14(3):231-233.
Gupta A, Tewari RK. Evaluation and comparison of transverse and impact strength of different high strength denture base resins. Indian Journal of Dental Research. 2016;27(1):61.
Narendra R, Reddy N, Reddy S, Sashi C, Chandra M, Balasubramanyam S. A comparative evaluation of impact strength of conventionally heat cured and high impact heat cured polymethyl methacrylate denture base resins: an in vitro study. J Contemp Dent Pract. 2013;14(6).
Oku JI. Impact properties of acrylic denture base resin. Part 1. A new method for determination of impact properties. Dent Mater J. 1988;7(2):166-173.
Downloads
Publicado
Como Citar
Edição
Seção
Licença
Copyright (c) 2021 CES Odontología
Este trabalho está licenciado sob uma licença Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Métricas do artigo | |
---|---|
Vistas abstratas | |
Visualizações da cozinha | |
Visualizações de PDF | |
Visualizações em HTML | |
Outras visualizações |