Preheated resin as a cementing agent: a topic review
DOI:
https://doi.org/10.21615/cesodon.33.2.14Keywords:
resin cement, composite resins, dental cements, preheated compositeAbstract
In the 90s, the use of the composite resin as a cementing agent began, which has the following advantages: a margin with a high filler content, ease of cleaning excesses before polymerization, potential to fill any defect in the preparation, improving marginal sealing etc. One of the controversies of this technique is the elevation of the intra-pulp temperature, which, added to the polymerization process, could rise to cause irreversible damage, however, it has been shown that the preheated resin cools rapidly, thanks to the dental tissues that dissipate heat and the elapsed time of bringing the resin from the oven to the mouth. With the heating of the resins, a reduction in their viscosity occurs, allowing less gaps and better marginal adaptation, without affecting the mechanical properties of the composite resins, this occurs due to increased molecular mobility, which optimizes its mechanical properties after polymerization. Regarding the adhesive properties, the resinous cements and the pre-heated resins have been evaluated by fixing the indirect restorations to the dental structure, obtaining with the pre-heated resins favorable results in relation to filtration, adhesive resistance, but in terms of thickness, resinous cement generates a thinner film, however it becomes possible to use pre-heated resin as a cementing agent as a safe technique.
Downloads
References
Schneider LF, Cavalcante LM, Silikas N. Shrinkage Stresses Generated during Resin-Composite Applications: A Review. J Dent Biomech. 2010;2010.
Mohammadi N, Jafari-Navimipour E, Kimyai S, Ajami AA, Bahari M, Ansarin M, et al. Effect of pre-heating on the mechanical properties of silorane-based and methacrylate-based composites. J Clin Exp Dent. 2016;8(4):373-8.
Espinosa R, Valencia R, Ceja I, Teyechea F. Disolución de agentes dentales de cementación: estudio in-vitro. RODYB. 2012;2(1):1-11.
Blalock JS, Holmes RG, Rueggeberg FA. Effect of temperature on unpolymerized composite resin film thickness. J Prosthet Dent. 2006;96(6):424-32.
Kogan E, Elizalde P, Reyes M, Castillo M, Puebla A, Kogan P. Cementación de restauraciones de cerómero libres de metal con resina restaurativa precalentada. Evaluación del rango de polimerización. ADM. 2006;63:131-4.
Scopin O, Borges G, Kyrillos M, Moreira M, Calichio L, Correr-Sobrinho L. The Area of Adhesive Continuity: A New Concept for Bonded Ceramic Restorations. Quintessence Int. 2013; 36(1): 9-26.
De Souza G, Braga RR, Cesar PF, Lopes GC. Correlation between clinical performance and degree of conversion of resin cements: a literature review. J Appl Oral Sci. 2015;23(4):358-68.
Elsayad I. Cuspal movement and gap formation in premolars restored with preheated resin composite. Oper Dent. 2009;34(6):725-31.
Daronch M, Rueggeberg FA, Moss L, De Goes MF. Clinically relevant issues related to preheating composites. J Esthet Restor Dent. 2006;18(6):340-51.
Edelhoff D, Ozcan M. To what extent does the longevity of fixed dental prostheses depend on the function of the cement? Working Group 4 materials: cementation. Clin Oral Implants Res. 2007;18(3):193-204.
Saab RC, da Cunha LF, Gonzaga CC, Mushashe AM, Correr GM. Micro-CT Analysis of Y-TZP Copings Made by Different CAD/CAM Systems: Marginal and Internal Fit. Int J Dent. 2018;2018:5189767.
Mundim F, Garcia F, Cruvinel D, Lima F, Bachmann L, Pires-de-Souza C. Color stability, opacity and degree of conversion of pre-heated composites. J Dent. 2011;39(1):25-9.
Daronch M, Rueggeberg FA, De Goes MF. Monomer conversion of pre-heated composite. J Dent Res. 2005;84(7):663-7.
Gregor L, Bouillaguet S, Onisor I, Ardu S, Krejci I, Rocca GT. Microhardness of light- and dual-polymerizable luting resins polymerized through 7.5-mm-thick endocrowns. J Prosthet Dent. 2014;112(4):942-8.
Shafiei F, Akbarian S, Daryadar M. Effect of Intermediate Agents and Preheated Composites on Repair Bond Strength of Silorane-Based Composites. J Dent (Tehran). 2015;12(9):669-77.
Prasanna N, Pallavi Reddy Y, Kavitha S, Lakshmi Narayanan L. Degree of conversion and residual stress of preheated and room-temperature composites. Indian J Dent Res. 2007;18(4):173-6.
Ayub KV, Santos GC, Rizkalla AS, Bohay R, Pegoraro LF, Rubo JH, et al. Effect of preheating on microhardness and viscosity of 4 resin composites. J Can Dent Assoc. 2014;80:1-12.
Froes-Salgado NR, Silva LM, Kawano Y, Francci C, Reis A, Loguercio AD. Composite pre-heating: effects on marginal adaptation, degree of conversion and mechanical properties. Dent Mater. 2010;26(9):908-14.
Goulart M, Damin D, Melara R, Conceicao A. Effect of pre-heating composites on film thickness. J Res Dent. 2013;1(4):274-80.
Magne P, Versluis A, Douglas WH. Effect of luting composite shrinkage and thermal loads on the stress distribution in porcelain laminate veneers. J Prosthet Dent. 1999;81(3):335-44.
Daroncha M, Rueggebergb F, Hallb G, De Goes M. Effect of composite temperature on in vitro intrapulpal temperature rise. Dent Mater 2007; 23(1):1283-8.
Rueggeberg F, Daronch M, Browning W, De Goes M. In vivo temperature measurement: tooth preparation and restoration with preheated resin composite. J Esthet Restor Dent. 2010;22(5):314-22.
Jarquín D, Bonilla S. Aumento de la temperatura en la superficie dental durante la foto-polimerización. Odont Vital. 2016;25(1):17-22.
Zach L, Cohen G. Pulp Response to Externally Applied Heat. Oral Surg Oral Med Oral Pathol. 1965;19(1):515-30.
González V. Resistencia adhesiva a la dentina de restauraciones indirectas de composite cementadas con cementos resinosos duales y composite precalentado. Gaceta Dental. 2014;25(4):84-95.
Tantbirojn D, Chongvisal S, Augustson DG, Versluis A. Hardness and postgel shrinkage of preheated composites. Quintessence Int. 2011;42(3):51-9.
Sabatini C, Blunck U, Denehy G, Munoz C. Effect of pre-heated composites and flowable liners on Class II gingival margin gap formation. Oper Dent. 2010;35(6):663-71.
Daronch M, Rueggeberg FA, De Goes MF, Giudici R. Polymerization kinetics of pre-heated composite. J Dent Res. 2006;85(1):38-43.
Rickman LJ, Padipatvuthikul P, Chee B. Clinical applications of preheated hybrid resin composite. Br Dent J. 2011;211(2):63-7.
Trujillo M, Newman SM, Stansbury JW. Use of near-IR to monitor the influence of external heating on dental composite photopolymerization. Dent Mater. 2004;20(8):766-77.
Cook W, Simon G, Burchill P, Lau M, Fitch T. Curing Kinetics and Thermal Properties of Vinyl Ester Resins. J Appl Polym Sci. 1996;64(1):769 - 81.
Freedman G, Krejci I. Warming up to composites. Compend Contin Educ Dent. 2004;25(5):371-4.
Daronch M, Rueggeberg F, Moss L. Effect of repeated and extendiing heating on conversion of composites. AADR Abstract. 2005:605.
Al-Sharaa KA, Watts DC. Stickiness prior to setting of some light cured resin-composites. Dent Mater. 2003;19(3):182-7.
Lee JH, Um CM, Lee IB. Rheological properties of resin composites according to variations in monomer and filler composition. Dent Mater. 2006;22(6):515-26.
Goncalves F, Kawano Y, Pfeifer C, Stansbury JW, Braga RR. Influence of BisGMA, TEGDMA, and BisEMA contents on viscosity, conversion, and flexural strength of experimental resins and composites. Eur J Oral Sci. 2009;117(4):442-6.
Sarrett DC. Clinical challenges and the relevance of materials testing for posterior composite restorations. Dent Mater. 2005;21(1):9-20.
Magne P, Malta DA, Enciso R, Monteiro-Junior S. Heat Treatment Influences Monomer Conversion and Bond Strength of Indirect Composite Resin Restorations. J Adhes Dent. 2015;17(6):559-66.
Magne P, Razaghy M, Carvalho MA, Soares LM. Luting of inlays, onlays, and overlays with preheated restorative composite resin does not prevent seating accuracy. Int J Esthet Dent. 2018;13(3):318-32.
Lohbauer U, Zinelis S, Rahiotis C, Petschelt A, Eliades G. The effect of resin composite pre-heating on monomer conversion and polymerization shrinkage. Dent Mater. 2009;25(4):514-9.
Lucey S, Lynch CD, Ray NJ, Burke FM, Hannigan A. Effect of pre-heating on the viscosity and microhardness of a resin composite. J Oral Rehabil. 2010;37(4):278-82.
Deb S, Di Silvio L, Mackler HE, Millar BJ. Pre-warming of dental composites. Dent Mater. 2011;27(4):51-9.
Calheiros FC, Daronch M, Rueggeberg FA, Braga RR. Effect of temperature on composite polymerization stress and degree of conversion. Dent Mater. 2014;30(6):613-8.
Dos Santos RE, Lima AF, Soares GP, Ambrosano GM, Marchi GM, Lovadino JR, et al. Effect of preheating resin composite and light-curing units on the microleakage of Class II restorations submitted to thermocycling. Oper Dent. 2011;36(1):60-5.
Wagner WC, Aksu MN, Neme AM, Linger JB, Pink FE, Walker S. Effect of pre-heating resin composite on restoration microleakage. Oper Dent. 2008;33(1):72-8.
Jongsma LA, Kleverlaan CJ. Influence of temperature on volumetric shrinkage and contraction stress of dental composites. Dent Mater. 2015;31(6):721-5.
Taubock TT, Tarle Z, Marovic D, Attin T. Pre-heating of high-viscosity bulk-fill resin composites: effects on shrinkage force and monomer conversion. J Dent. 2015;43(11):1358-64.
Munoz CA, Bond PR, Sy-Munoz J, Tan D, Peterson J. Effect of pre-heating on depth of cure and surface hardness of light-polymerized resin composites. Am J Dent. 2008;21(4):215-22.
D'Amario M, Pacioni S, Capogreco M, Gatto R, Baldi M. Effect of repeated preheating cycles on flexural strength of resin composites. Oper Dent. 2013;38(1):33-8.
Rueggeberg FA, Giannini M, Arrais CAG, Price RBT. Light curing in dentistry and clinical implications: a literature review. Braz Oral Res. 2017;31(suppl 1):e61.
Alizadeh P, Pournaghi F, Jafari E, Ebrahimi M, Naser F, Salari A. The effect of repeated preheating of dimethacrylate and silorane-based composite resins on marginal gap of class V restorations. J Dent Res Dent Clin Dent Prospects. 2017;11(1):36-42.
Moon PC, Tabassian MS, Culbreath TE. Flow characteristics and film thickness of flowable resin composites. Oper Dent. 2002;27(3):248-53.
Dionysopoulos D, Tolidis K, Gerasimou P, Koliniotou-Koumpia E. Effect of preheating on the film thickness of contemporary composite restorative materials. Journal of dental sciences. 2014;9(1):313 - 9.
Leevailoj C, Cochran MA, Matis BA, Moore BK, Platt JA. Microleakage of posterior packable resin composites with and without flowable liners. Oper Dent. 2001;26(3):302-7.
Mounajjed R, Salinas TJ, Ingr T, Azar B. Effect of different resin luting cements on the marginal fit of lithium disilicate pressed crowns. J Prosthet Dent. 2018;119(6):975-80.
Sampaio CS, Barbosa JM, Caceres E, Rigo LC, Coelho PG, Bonfante EA, et al. Volumetric shrinkage and film thickness of cementation materials for veneers: An in vitro 3D microcomputed tomography analysis. J Prosthet Dent. 2017;117(6):784-91.
Pegoraro TA, da Silva NR, Carvalho RM. Cements for use in esthetic dentistry. Dent Clin North Am. 2007;51(2):453-71.
Corral Halal D, Domínguez Burich RJI, Bader Mattar M. Análisis comparativo del grado de sellado marginal de restauraciones cementadas con un cemento de resina compuesta y con una resina compuesta de restauración fluidificada. Rev Dent Chile. 2015;106(1):20 - 5.
Luna Salinas T. Estudio comparativo invitro: resistencia a la tracción del cemento resinoso dual y la resina compuesta precalentada como agente cementante en restauraciones indirectas a base de cerómeros. Quito: Universidad Central de Ecuador; 2017.
Cantoro A, Goracci C, Papacchini F, Mazzitelli C, Fadda GM, Ferrari M. Effect of pre-cure temperature on the bonding potential of self-etch and self-adhesive resin cements. Dent Mater. 2008;24(5):577-83.
Arikawa H, Kanie T, Fujii K, Ban S, Takahashi H. Light-attenuating effect of dentin on the polymerization of light-activated restorative resins. Dent Mater J. 2004;23(4):467-73.
Goulart M, Borges Veleda B, Damin D, Bovi Ambrosano GM, Coelho de Souza FH, Erhardt MCG. Preheated composite resin used as a luting agent for indirect restorations: effects on bond strength and resin-dentin interfaces. Int J Esthet Dent. 2018;13(1):86-97.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2020 CES Odontología
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
| Article metrics | |
|---|---|
| Abstract views | |
| Galley vies | |
| PDF Views | |
| HTML views | |
| Other views | |
